Solenoid directional valve Vickers DG4V-3-2A-M-U-H7-60

The DG4V-3-2A-M-U-H7-60 valve from the Vickers DG4V-3 series is a solenoid operated directional valve. The series has been used on industrial machines for many years and is in demand for maintaining existing equipment.

Key specifications of DG4V-3-2A-M-U-H7-60

• Maximum pressure: 350 bar
• Function: Directional control
• Size: NG6
• Maximum flow: 80 L/min
• Actuation: Solenoid operated
• Ports: 4

These values come from the manufacturer's published data. The full list is in the specifications tab.

Applications

• Industrial machinery
• Power units
• Valve replacement on existing machines

How it works

A directional control valve sets the oil path between the pump, the actuator and the tank. As the spool moves inside the body, ports connect or close, and a cylinder or motor extends, retracts or holds. The spool type decides whether the ports are closed or open to tank in the centre position.

About the brand

Vickers is one of the long-standing names in industrial hydraulics, and its vane pumps and valves are installed on many existing machines. The brand is now part of Danfoss.

Selection and maintenance

When choosing, check the mounting pattern, spool type, coil voltage and connector, because one different letter in the code can change how the circuit behaves. A sticking spool usually comes from dirty oil, and a burnt coil from the wrong voltage or a stuck spool. Before replacing a valve, also check the circuit filter and the oil.

If this unit is already in service and has a fault, see hydraulic valve repair.

FAQ