Solenoid directional valve Yuken DSG-01-3C60-D24-N1-50

The DSG-01-3C60-D24-N1-50 valve from the Yuken DSG-01 series is a solenoid operated directional valve mounted on a subplate. The series is widely used on machine tools, presses and industrial power units.

Key specifications of DSG-01-3C60-D24-N1-50

• Maximum pressure: 350 bar
• Function: Directional control
• Size: NG6
• Maximum flow: 100 L/min
• Actuation: Solenoid operated
• Positions: 3

These values come from the manufacturer's published data. The full list is in the specifications tab.

Applications

• Machine tools
• Hydraulic presses
• Industrial power units

How it works

A directional control valve sets the oil path between the pump, the actuator and the tank. As the spool moves inside the body, ports connect or close, and a cylinder or motor extends, retracts or holds. The spool type decides whether the ports are closed or open to tank in the centre position.

Reading the code

About the brand

Yuken is a Japanese maker of hydraulic pumps and valves, widely found on machine tools, presses and injection moulding machines.

Selection and maintenance

When choosing, check the mounting pattern, spool type, coil voltage and connector, because one different letter in the code can change how the circuit behaves. A sticking spool usually comes from dirty oil, and a burnt coil from the wrong voltage or a stuck spool. Before replacing a valve, also check the circuit filter and the oil.

If this unit is already in service and has a fault, see hydraulic valve repair.

FAQ